Quote Basket
M Series Low Power Highpass Filter

M Series

Low Frequency Highpass Filter

PC mountable or connector with lower loss, more complexity, and higher power.

Request a Quote
Drawings
 Standard Parameters Special Parameters Comments
3 dB Cutoff Frequency 10 to 100 MHz 2 to 200 MHz  
Maximum VSWR 1.5:1 1.2:1  
Average Input Power 0.5 Watts Up to 2.5 Watts Measured up to 10,000 feet
Maximum Attenuation Up to 50 dBa Up to 65 dBa  
Topology Chebychev *Consult Factory  
Nominal Impedance 50 Ohms **Consult Factory  
Number of Sections 6 12  
Shock 5 G's Up to 500 G's See Below
Vibration 5 G's Up to 500 G's See Below
Humidity 90%, non-condensing Up to 100%, non-condensing See Below
Alititude Unlimited Unlimited See Below
Operating Temperature 0 to +50 °Celsius -55 to +125 °Celsius See Below
Storage Temperature -55 to +85 °Celsius -65 to +150 °Celsius See Below
Gross Leak As required As required Additional testing charges will apply
Fine Leak As required As required Additional testing charges will apply
Moisure Resistance 100% 100%  
Dimensions 2.38" x 1.00" x 1.00"    
Mounting Options PC Mount or Connectorized   Gross and Fine Leak do not apply to connectorized parts
Connector Options SMA Female or Male Type "N", BNC, TNC, SMC, or SMB Female or Male  

Other parameters may be specified. Please consult factory for any deviation from standard.

*Other topologies are available upon requrest or design need. Tese can include, but are not limited to:
Gaussian, Butterworth, Bessel, Elliptical, and Pole-placed designs.

**Other impedances can be achieved, but the package is designed as a 50 Ohm unit. Matching to any other impedance will need prior approval and may not be guaranteed.

Any environmental testing will incure additional charges. Consult factory for costs associated with environmental testing. All filters can be "Designed to" and may not require the additional testing. Each application will be different.

Swoosh